Lincoln Electric SVM189-B Service Manual page 66

F-12
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE (CONTINUED)
3/4"
5/16 Hex Head Screws
Screws
(2 Places)
PROCEDURE
1. Disconnect power to the machine.
2. Remove the two(2) 5/16 hex-head screws from the
top of the door and remove the door
3. Remove the ten(10) hex-head screws from the top
and left side of the machine. Note the position of the
two(2) longer screws. See Figure F.1
NOTE: If the machine has a plastic handle, remove the
5/16 hex-head screw from the front and remove
the handle.
4. Carefully lift and remove case cover from the
machine.
NOTE: Depending on what needs to be done, it may
be desirable to remove the handle on machines
with the metal handle. See Figure F.1
TROUBLESHOOTING & REPAIR
FIGURE F.1 – CASE REMOVAL
2 Phillips Screws
on Models with
Metal Handle
COMPACT WIRE WELDERS
5/16 Hex Head
on Models with
Plastic Handle
F-12