Additional Safety Rules - Makita 6095D Instruction Manual

1.
2 .
3.
4.
5.
6.
ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
Do not charge Battery Cartridge when temperature
i s
BELOW 10°C
(5OOF)
or ABOVE 4OoC (104OF).
Do not attempt t o use a step-up transformer, an engine generator or DC power
receptacle.
Do
not allow anything to cover or clog the charger vents.
DO not short the battery cartridge:
(1)
Do not touch the terminals with any conductive material.
(2) Avoid storing battery cartridge in a container with other metal objects such
(3) Do
not expose battery cartridge t o water or rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
Do not store the tool and Battery Cartridge in locations where the tempera-
ture may reach or exceed
5OoC (122OF).
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
completely worn out. The battery cartridge can explode
in
a fire.
7.
Always cover the battery terminals with the battery cover when the battery
cartridge is not
in
use.
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2 .
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4. Keep hands away from rotating parts.
5.
When drilling into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drill into a "live" wire.
not have t o be plugged into an electrical outlet.
Be sure no one is below when using the tool in high locations.
6. Do
not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the drill bit or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5