Control Board Removal - Lincoln Electric RANGER SVM120-A Service Manual

F-56
16. Connect current sensing leads #254 and
#254A. See the Wiring Diagram for the
proper connections.
17. Connect the two molex plugs.
18. Connect the three individual leads #213,
#222 and #5C.
19. Replace any cable ties that were cut dur-
ing the removal procedure.
20. With the 5/16" nut driver, install the control
board cover.
21. Install the right case side, top, gaskets and
double door support rod.
TROUBLESHOOTING & REPAIR

CONTROL BOARD REMOVAL

AND REPLACEMENT (continued)
RANGER 10-LX
F-56