Installation; Technical Specifications - Lincoln Electric RANGER 300 D Operator's Manual

A-1
TECHNICAL SPECIFICATIONS - Ranger 300 D (K1522-1), Ranger 300 DLX (K1522-2)
Make/Model Description
Kubota 3 cylinder
DH905 26.0 HP @
Diesel Engine 3600 RPM
Welding Output
DC Constant Current 300 amps
AC Constant Current 300 amps
DC Constant Voltage (300 D) 200 amps
DC Constant Voltage (300 DLX) 300 amps
DC Constant Voltage (300 DLX) 280 amps
HEIGHT
37.38 in.
949.4 mm
* Duty cycle is based on a 10 minute period. The machine can be loaded to 300 amps for 6 minutes out of every 10 minute
period.
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.

INSTALLATION

INPUT - DIESEL ENGINE
Speed (RPM)
High Idle 3700
Low Idle 2150
Full Load 3600
RATED OUTPUT - WELDER
Volts at Rated Amps
25 volts
25 volts
20 volts
30 volts
30 volts
OUTPUT - GENERATOR
Auxiliary Power
12,000 Watts, 60 Hz
120/240 Volts
100 % Duty Cycle
PHYSICAL DIMENSIONS
WIDTH
24.75 in.
628.7 mm
RANGER 300 D AND 300 DLX
Displacement Starting
System
54.9 cu. in 12VDC battery
(898 cc) (Group 45, 495
cold crank amps)
Bore x Stroke 1 KW Starter
30 A. Alternator
2.83" x 2.90" w/ built in reg.
(72 mm x 73.6mm)
Duty Cycle
100%
100%
100%
60%*
100%
1
DEPTH
60.50 in.
1528.6 mm
A-1
Capacities
Fuel: 10 gal.
38 L
Oil: 5.4 Qts.
5.1 L
Coolant: 5.7 qts.
5.4 L
Max. OCV @ 3700 RPM
80 volts RMS
WEIGHT
1093 lbs. (300 D)
1133 lbs. (300 DLX)
480.8 kg. (300 D)
499.0 kg. (300 DLX)