Lincoln Electric RANGER 300 D Operator's Manual page 41

F-1
RANGER 300 D & RANGER 300 DLX / LN-25 ACROSS THE ARC CONNECTION DIAGRAM
14 PIN
AMPHENOL
(RANGER 300 DLX
ONLY)
TO WORK
N.A. WELDING CABLE MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE
AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.
N.B. USE POLARITY SWITCH TO SELECT DESIRED ELECTRODE POLARITY. POSITION THE RANGE SWITCH TO
A WIRE WELDING-CV POSITION.
N.C. IF REMOTE OUTPUT CONTROL IS USED, PLACE LOCAL REMOTE SWITCH IN "REMOTE" POSITION.
N.D. ON RANGER 300 DLX, THE WELDING TERMINALS SWITCH MUST BE IN THE "ALWAYS ON" POSITION.
N.E. PLACE IDLER SWITCH IN "AUTO" OR "HIGH" IDLE POSITION AS DESIRED.
RANGER 300 D & RANGER 300 DLX / LN-25 ACROSS THE ARC CONNECTION DIAGRAM
14 PIN
AMPHENOL
(RANGER 300 DLX
ONLY)
TO WORK
N.A. WELDING CABLE MUST BE OF PROPER CAPACITY FOR THE CURRENT AND DUTY CYCLE OF IMMEDIATE
AND FUTURE APPLICATIONS. SEE OPERATING MANUAL.
N.B. USE POLARITY SWITCH TO SELECT DESIRED ELECTRODE POLARITY. POSITION RANGE SWITCH TO A
WIRE WELDING-CV POSITION.
N.C. IF REMOTE OUTPUT CONTROL IS USED, PLACE LOCAL REMOTE SWITCH IN "REMOTE" POSITION.
N.D. ON RANGER 300 DLX, THE WELDING TERMINALS SWITCH MUST BE IN THE "ALWAYS ON" POSITION.
N.E. PLACE IDLER SWITCH IN "AUTO" OR "HIGH" IDLE POSITION AS DESIRED.
CONNECTION DIAGRAMS
WITH OPTIONAL K857 REMOTE CONTROL
WARNING
Do not operate with panels open.
Disconnect NEGATIVE (-) BATTERY LEAD
before servicing.
Do not touch electrically live parts.
6 PIN
AMPHENOL
ELECTRODE
TO WORK
WITH OPTIONAL K444-1 REMOTE CONTROL
WARNING
Do not operate with panels open.
Disconnect NEGATIVE (-) BATTERY LEAD
before servicing.
Do not touch electrically live parts.
6 PIN
AMPHENOL
ELECTRODE
TO WORK
RANGER 300 D AND 300 DLX
Keep guards in place.
Keep away from moving parts.
Only qualified personnel should install,use
or service this equipment.
OPTIONAL K857
REMOTE CONTROL
LN-25
WIRE FEEDER
WORK CLIP LEAD
ELECTRODE CABLE
Keep guards in place.
Keep away from moving parts.
Only qualified personnel should install,use
or service this equipment.
OPTIONAL K444-1
REMOTE CONTROL
LN-25
WIRE FEEDER
WORK CLIP LEAD
ELECTRODE CABLE
F-1
TO WORK
6-20-97
S23732-1
TO WORK
6-20-97
S23732-2