Martin Audio DX0.5 User Manual page 51

DX0.5
Next are two buttons to bypass or reset all filters;‐
'Bypass ALL' will return the signal path to a flat response but retains the filter slopes you are created. A second click will put the
EQ back in place. 'FLAT' as the name suggests resets the gain of all filters to 0dB. Frequency and Q factor values are retained but
any gain settings are lost. Note that previous values cannot be restored unless you have stored your settings as a Preset, they
will have to be manually re‐entered.
The next features is the EQ type which offers a drop‐down with the filter types available;‐
All filters are Bell by default but may be configured as High Shelf with either a 6 or 12dB per octave slope, or Low Shelf, also with
6 or 12dB per octave slopes.
Finally there are three fader controls to adjust the parameters of each filter; Gain, Frequency and Quality factor, or if high or low
shelf filters are selected Gain and Frequency;‐
HAM09224 User Guide V1.0
USER GUIDE
50