DX0.5
Input channel
Both input channels have 5 bands of equalisation available which is configured in this window. The graph in the main section of
the window shows a representation of the frequency response of the filtering applied with the red trace for channel A, blue for
channel B. The position of the five filters is represented by the circled numbers with the one highlighted in green being the
currently selected filter. The response for the selected filter is shown with a dashed yellow trace;‐
The section at the top of the page is where the filters to be adjusted can be selected;‐
Filters 1 to 5 are shown on the left with a thumbnail of a PEQ filter, the selected filter will be highlighted in green. Over to the
right are A and B buttons to select which of the two input channels are to be configured. EQ in inputs can be completely
independent unless you have selected the input link function. Finally there is a 'Show All' button which will display both traces;‐
HAM09224 User Guide V1.0
USER GUIDE
48