DX0.5
Control Application
The DX0.5's Control Application provides you with a simple, intuitive means of programming the device using your USB‐equipped
Windows‐based PC. All of the System Setup, Preset, Utilities and Editing functions detailed in this user guide are available via the
software, plus a few more which are detailed below.
To get started, simply visit www.Martin Audio.com, navigate "Support" and select "software" from the drop‐down menu.
Download the driver and software installers and follow the installation instructions.
Once you've successfully installed the driver and software and connected your DX0.5, simply launch the DX0.5 application. The
software will auto‐detect and connect to the DX0.5, after which you can begin programming in real time. Or if you prefer to work
offline, you can configure a system via the software, save your work as a preset, and later connect to the DX0.5 and load your
settings into it.
When the DX0.5 is connected and controlled by the software application, all front panel controls on the unit are disabled and
the LCD screen indicates that the unit is locked.
Launching the application for the first time will take you to the Utilities screen;‐
This window is divided into four sections where you can manage program, system, security and, options. At the bottom of the
screen are six tabs that give you one‐click access to individual screens showing Gain, Mute and Limiter settings, Routing, Input
and output channels and the default Utilities screen. The active tab is shown highlighted.
At the top of the window are key functions that remain visible regardless of which tab is selected;‐
Connect Device
With a DX0.5 connect to your PC with a standard USB cable, click on the Connect Device button;‐
HAM09224 User Guide V1.0
USER GUIDE
31