DX0.5
Turn the Edit2 [8] or Edit3 [9] Control to scroll between these three choices. Press the Enter Button [10] once a unit of delay has
been decided. The processor will return to the Delay Units splash screen. Or press the ESC button [11] to return to the System
Utility menu without making any changes.
Ramps on changes
When engaged, sudden volume changes may be avoided when changing parameter values, particularly when using a Windows‐
based PC to control the unit. Disengage this feature for live applications since instant response to change is desired.
Turn the Edit2 [8] or Edit3 [9] Control to scroll between Ramps : On and Ramps :
Enter Button [10] only once here. The processor will return to the Ramps on changes splash screen. Or press the ESC button [11]
to return to the System Utility menu without making any changes.
Software Version
Nothing may be edited on this page. Press the Enter Button [10] to view what version of software is installed in this DX0.5. Press
the Enter [10] or ESC [11] Button to return to the Software Version splash screen.
Preset Utilities
This is where to save, recall and delete presets on the DX0.5. This is useful when the PA system has multiple setups for different
environments or several loudspeaker systems utilizing varying setups.
Note: As mentioned earlier, the DX0.5 will load up the last state it was in when it was powered down.
As mentioned earlier, the way to get here from the main menu is by pressing the Utility Button [12]. Once inside the Utility Menu,
scroll the Nav/Edit1 Control [7] clockwise to Preset Utilities. Now press the Enter Button [10] again to reach the sub‐menus as
listed below:
Recall a Preset
Save a Preset
Delete a Preset
Looking at each of these sub‐menus individually;‐
1.
The Nav/Edit1 Control [7] is used to navigate between the three Preset Utilities.
2.
The ESC button [11] is used to return to the Preset Utilities menu.
3.
The Enter Button [10] is used to enter and edit the chosen Preset Utility.
Press the Enter Button [10] to enter Recall a Preset.
Recall a Preset
If a preset has been saved earlier, it may be recalled here. If no presets are stored in the unit, the processor will return to the
Recall a Preset splash screen.
If presets are available, turn the Edit2 [8] or Edit3 [9] Control to select which preset to recall. Press the Enter Button [10] to select
a preset and again to confirm recall. The preset will load and the processor will return to the Recall a Preset splash screen.
Save a Preset
Once your desired system settings have been programmed in, save it to the DX0.5 for recall later. Turn the Edit2 [8] or Edit3 [9]
Control to scroll between presets 1 – 24. Press the Enter Button [10] once you decide the location in which you wish to save the
preset.
Next you are able to name the preset. The Nav/Edit1 Control [7] moves the cursor left and right while the Edit2 [8] and Edit3 [9]
Controls change the text. Once satisfied with the results, press the Enter Button [10] twice: once to select and again to confirm.
The processor will return to the Save a Preset splash screen.
It is possible to save over an existing preset. If attempted, you will need to confirm by pressing the Enter Button [10] again. Or
press the ESC Button [11] to return to the Preset Utilities menu without overwriting the preset.
HAM09224 User Guide V1.0
USER GUIDE
Off [default]. If changing, press the
18