DX0.5
Delete a Preset
If a preset is no longer needed for recall, it may be deleted here. It will help to keep the DX0.5's memory clutter‐free. Turn the
Edit2 [8] or Edit3 [9] Control to scroll between presets 1 – 24. Press the Enter Button [10] once you have selected the preset to
delete. Press the Enter Button [10] twice: once to select and again to confirm. The processor will return to the Delete a Preset
splash screen.
Security Utilities
This is where to lock the DX0.5 to prevent anyone from accidentally (or intentionally) changing the settings. You also have control
over some of the system behaviour after it's been locked.
As discussed earlier, the way to get here from the main menu is by pressing the Utility Button [12]. Once inside the Utility Menu,
scroll the Nav/Edit1 Control [7] clockwise to Security Utilities. Now press the Enter Button [10] again to reach the sub‐menus as
listed below.
Show Parameter
Lock Unit
User Password
Enable Password
1.
The Nav/Edit1 Control [7] is used to navigate between the four Security Utilities.
2.
The ESC button [11] is used to return to the Security Utilities menu.
3.
The Enter Button [10] is used to enter and edit the chosen Security Utility.
Press the Enter Button [10] to enter Show Parameter.
Show Parameter
Once a DX0.5 has been locked, you have the option of allowing the various processing parameter values to be shown or not.
Turn the Edit2 [8] or Edit3 [9] Control to scroll between Parameter will be shown [default] and Parameter will
not be
shown. If changing, press the Enter Button [10] only once here. The processor will return to the Show Parameter
splash screen.
Lock Unit
Locking a DX0.5 prevents accidental changes to its settings.
Turn the Edit2 [8] or Edit3 [9] Control to scroll between Lock : Off [default] and Lock :
Button [10] only once here.
When locked, a symbol resembling a key will appear in the lower‐right hand area of the LCD Display [6]. Pressing the Utility
Button [12] here returns you directly to the Lock Unit splash screen.
When unlocked, the key symbol disappears and the processor will return to the Security Utilities splash screen.
User Password
For the ultimate protection from accidental and intentional parameter adjustments, set up a user password here. Only those
with the password will be allowed access to edit processor settings.
The Nav/Edit1 Control [7] moves the cursor left and right while the Edit2 [8] and Edit3 [9] Controls change the text.
In order to change the password, the current password needs to be entered. The default / factory password is: 000000
Enter the current password and press the Enter Button [10]. It will now prompt you for a new password. Use as few as one (and
up to a maximum of six) characters, using any combination of letters, numbers and symbols. Enter a new password and press
the Enter Button [10]. It will now prompt you to confirm the new password. Enter it and press the Enter Button again to confirm.
The processor will return to the User Password splash screen.
HAM09224 User Guide V1.0
USER GUIDE
On. If changing, press the Enter
19