Lincoln Electric POWER MIG SVM160-B Service Manual page 80

F-36
MOTOR & GEAR BOX ASSEMBLY REMOVAL AND
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician
or machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
This test will aid the technician in the removal and replacement of the Motor and Gear box
assembly.
MATERIALS NEEDED
3/8" Nut driver
5/16 in. Nut driver
9/16" Wrench
7/16" Wrench
Small slot head screwdriver
Large Phillips head screwdriver
Pliers
Wiring Diagram
TROUBLESHOOTING & REPAIR
REPLACEMENT
WARNING
POWER MIG 300
F-36