Installation; Technical Specifications - Lincoln Electric SA-250 Operator's Manual

A-1
TECHNICAL SPECIFICATIONS - SA-250 ( K1283-8)
Make/Model Description Horsepower Operating Displacement cu. in.(ltrs)
4 Cylinder
4 Stroke
Naturally
Perkins
Aspirated
104-22
Water
Cooled
Engine
DESCRIPTION
300 Amp DC Welder
All Copper Windings
Pure DC Power Generator
HEIGHT
43.13** in.
1096.0 mm
LUBRICATION
Full Pressure with Full Flow Filter
AIR CLEANER ENGINE IDLER
Single Element Automatic Idler
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.
* Based on a 10 min. period.
** Includes Top of Lift Bale.

INSTALLATION

INPUT - DIESEL ENGINE
@ 1800RPM S
PEED
High
1800RPM
32.7 HP
Full Load
1725RPM
Low Idle
1400RPM
RATED OUTPUT @ 104°F(40C°) - WELDER
RATED DC OUTPUT*
VOLTS @ RATED AMPS
30V @ 250A
32V @ 300A
98V DC Max. OCV @ 1800RPM
RATED OUTPUT @ 104°F(40C°) - GENERATOR
Auxiliary Power
3,000 Watts Continuous, 60 Hz AC
26 Amps @115V
13 Amps @ 230V
PHYSICAL DIMENSIONS
WIDTH
28.00 in.
711.2 mm
ENGINE COMPONENTS
Indirect Fuel Injector
Electrical Shutoff Solenoid
Mechanical Fuel Pump
Low noise Muffler:
Made from long life,
aluminized steel.
135.6 (2.2)
DUTY CYCLE
100%
60%
1
DEPTH
67.00 in.
1702.0mm
FUEL SYSTEM
MUFFLER
SA-250
Starting Capacities
System
12VDC Battery
and starter
Fuel: 15gal.(57L)
Oil: 8.7 qts.
(8.2L)
Push Button
Starter
Radiator Coolant
(650 Cold
9.5 qts.
crank amps)
(9.0L)
DC CURRENT RANGE
Fine Adjustment in each Range
40-350 AMPS
220-Max.
160-240
120-190
80-130
Min.-90
WEIGHT
1470 lbs. (667kg.)
GOVERNOR
Mechanical Governor
ENGINE PROTECTION
Shutdown on low oil
pressure and engine
temperature.
A-1