BT Verve 3010 Executive User Manual page 42

Verve 3010 user guide ~ 6.1 Edition ~ 14th October '02 ~ 4710
To register other GAP
handsets to your Verve 3010
base station
Providing your handset
is GAP (Generic Access
Profile) compliant, you
can register it to your
Verve 3010 base.
Put your handset in
registration mode
according to the
instructions in its user
guide.
Press and hold the PAGE
button on the Verve 3010
Page
base station until the
Power/In Use light flashes.
After a short period the
handset will be registered.
The Verve 3010 will allocate
the next available internal
number to the handset.
To de-register a handset
from a base
Press the Menu options
Menu
button.
Press the DOWN
M
navigation button until
REGISTRATION is displayed.
40
Press the OK options
OK
button, REGISTER HS is
displayed.
Press the DOWN
M
navigation button.
DE-REG HS is displayed.
Press the OK options
OK
button.
PLEASE WAIT flashes on
the handset display.
SYS PIN? is then displayed.
Enter the 4 digit PIN
number of the base you
want to de-register from.
Press the OK options
OK
button.
HANDSET 1 is displayed.
Press the DOWN
M
navigation button until the
required handset number
is displayed.
Press the OK options
OK
button.
Display shows
HS X REMOVED.
A confirmation tone will
be heard and the handset
will be de-registered.