Table of Contents
Advertisement
Verve 3010 user guide ~ 6.1 Edition ~ 14th October '02 ~ 4710
To switch ON or OFF
L
press the UP or DOWN
M
navigation button until
your required choice is
displayed.
Press the Save options
Save
button.
You will hear a
confirmation tone.
Press the RED PHONE
button to return to the
idle display.
To select a base
You are able to register
your Verve handset to 4
bases. If your handset has
been registered to more
than one base you can
select which one it uses.
Press the Menu options
Menu
button.
Press the DOWN
M
navigation button until
SETTINGS is displayed.
Press the OK options
OK
button.
Press the DOWN
M
navigation button until
SELECT BASE is displayed.
Press the OK options
OK
button, your current base
selection is displayed e.g.
BASE 1.
If your handset is
registered to more than
one base press the DOWN
M
navigation button to select
one of the other base
stations (1, 2, 3, 4, AUTO).
Press the OK options
OK
button.
Note
If AUTO is selected the handset will
automatically link to another base
with a strong signal if the signal it
is currently receiving from its
present base becomes very poor.
When you have selected the base
station the handset will try locating
the base, the display will show
SEARCHING until it is located.
29
Advertisement
Table of Contents
