Working With Built-In Programs - Elation DLED Par Zoom Manual

12. WORKING WITH BUILT-IN PROGRAMS

The fixture comes equipped with a built-in DMX recorder that allows custom programs to be
installed and recalled directly from the fixture' s control board. Programs can be created and
stored using the fixture' s control board or by using a n external DMX controller. The following
instructions will detail the procedures for using the on-board system menu as well as using a
DMX compliant controller.
-Auto Save
With this function you can automatic save the number of steps in the Program Run.
1. Select " REC" by pressing [UP] or [DOWN] button.
©Elation Professional, Los Angeles Ca.
- Main menu 4
1. Press [MENU] to enter the main menu (display
flashing).
2. Press the [UP] or [DOWN] button to select
" EDIT" .
- Define the number of steps in Run
With this function you can define the number of
steps in the Program Run.
1. Select " STEP" by pressing [UP] or [DOWN]
button.
2. Press [ENTER], the display shows " S-XX" , " X"
stands for the total amount of steps you want to save,
so you can call up to 48 scenes in " RUN" . For
example if the " XX" is 05, it means that " RUN" will
run the first 5 scenes you saved in " EDIT" .
3. Press [ENTER] to confirm or Press [ M ENU] to
return to the main menu.
31
DLED Par Zoom
www.ElationLighting.com
™