Beeper Indications - Symbol LS 2104 Product Reference Manual

LS 2104 Product Reference Guide

Beeper Indications

Standard Use
Beeper Sequence
Short high tone
4 Beeps - long low tone
5 Beeps - low tone
Lo/hi/lo tone
Hi/hi/hi/lo tone
Parameter Menu Scanning
Short high tone
Lo/hi tone
Hi/lo tone
Hi/lo/hi/lo tone
Code 39 Buffering
Hi/lo tone
3 Beeps - long high tone
Lo/hi/lo tone
4 Beeps - long low tone
Lo/hi tone
3-8
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error has been detected in a scanned
symbol. The data is ignored. This will occur if a unit is
not properly configured. Check option settings.
Convert or format error
ADF transmit error
RS-232 receive error
Correct entry scanned or correct menu sequence
performed.
Input error, incorrect bar code or "Cancel" scanned,
wrong entry, incorrect bar code programming sequence;
remain in program mode.
Keyboard parameter selected. Enter value using bar code
keypad.
Successful program exit with change in the parameter
setting.
New Code 39 data was entered into the buffer.
Code 39 buffer is full.
The buffer was erased, or there was an attempt to
transmit an empty buffer. When the Code 39 buffer was
empty, the scanner read a command to clear or to
transmit a Code 39 buffer.
Error in data transmission.
A successful transmission of buffered data.
Indication