Setting Up The Ls 2104; Installing The Cable; Switching Cables - Symbol LS 2104 Product Reference Manual

Setting Up the LS 2104

Installing the Cable

Insert the cable into the receptacle on the bottom of the scanner, as shown below:

Switching Cables

Different cables are required for different hosts. To change the scanner cable:
1. Press the tab on the cable with a small screwdriver.
2. Pull the cable out of the receptacle on the bottom of the scanner.
3. Insert a new cable in the receptacle. Press the cable firmly into the receptacle until
you hear a click.
Figure 1-2. Installing the Cable
Setting Up the LS 2104
1-3