Audience; Unpacking - Symbol LS 2104 Product Reference Manual

LS 2104 Product Reference Guide
complete line of Symbol Technologies portable terminals and the full range of
SYMBOL and OmniLink
LS 2104 - With a simple cable change, this scanner is compatible with:
!
" RS 232C asynchronous terminals
TM
" Synapse
"
Wand Emulation terminals
"
IBM 4683/4, 4693/4 series of terminals
"
All leading OCIA terminals, including NCR, Nixdorf, and ICL terminals.
"
Dual RS-232 Hosts
"
Popular OCR terminals, such as Fujitsu and ICL.
LS 2106 - The LS 2106 scanner is a keyboard "wedge" interface which adds efficient,
!
reliable bar code reading to your PS/2 and AT/XT terminal. Since entered scan data
is transmitted as keystrokes, no software changes to the host system are necessary.
The scanner contains on-board discrete keyboard wedge communications for
connecting to asynchronous terminals and host systems. It can also accommodate
any of the Synapse™ "Smart Cables" which allows you to connect to a wide variety
of host systems. Some installations require one cable; others require additional
adapters between the keyboard, the PC, and the y-cable.
All of the LS 2100 series scan automatically at the rate of 36 scans per second. For decode
capability, see Technical Specifications on page 3-4.

Audience

The intended audience for this manual is personnel performing installation/setup and
programming of LS 2104 scanners.

Unpacking

Remove the LS 2104 from its packing and inspect it for damage. If the scanner was damaged
in transit, call the Symbol Support Center at one of the telephone numbers listed on page x.
KEEP THE PACKING. It is the approved shipping container and should be used if you ever
need to return your equipment for servicing.
1-2
TM
interface controllers.
"Smart Cables", which allow you to connect to: