Transfer With Camp-On; Transfer To Voice Mail; Call Waiting; Conference Calls - Samsung IDCS 28D User Manual

Keysets
Hide thumbs Also See for IDCS 28D:
Table of Contents

Advertisement

line when the called station hangs up or you can press TRANSFER to
return to the outside party. If you wish to send the call to another exten-
sion without waiting for the first station to hang up, simply press anoth-
er DSS button. OR
Press the CALL button or C.O. line key to return to the outside party and
begin the transfer process again.
When you are transferring a call to a keyset set for Voice Announce or Auto
Answer, the transferred call will always ring.
NOTES:
1. After the inside party answers, you may alternate back and forth
between the parties by pressing the TRANSFER key.
2. If you receive No More Calls tone, that station has no key available to re-
ceive another call. Press TRANSFER to return to the other party.
3. You cannot transfer an Intercom call by pressing a DSS key. You must
press the TRANSFER key and dial the destination extension number.

TRANSFER WITH CAMP-ON

When you are transferring a call to another station and you receive a busy
signal, you may camp the call on to this station. Simply hang up when you
hear the busy signal. The called party will be alerted that a call is waiting for
them.
NOTE: If you receive No More Calls tone, that station has no key available
to receive another call. Press TRANSFER to return to the outside caller.

TRANSFER TO VOICE MAIL

This feature is used to send a call directly to a voice mailbox. Your keyset
must have a correctly programmed VT key to accomplish this. To transfer a
call directly to a voice mailbox:
While on a call, press the VT key and dial the mailbox number.
Hang up when dialing is completed.

CALL WAITING

If an outside call has been camped-on to your phone or another station has
camped-on to you:
Your keyset will ring and the call that is waiting for you (camped-on) will
flash green.
Press the flashing button to answer; your other call will go on hold auto-
matically if your station has the Automatic Hold feature set. If not, you
must press HOLD and then the flashing button. OR
Finish the first call and hang up; the waiting call will ring.
Lift the handset or press the ANS/RLS key to answer.
NOTE: Intercom calls will not go on Automatic Hold.

CONFERENCE CALLS

You may conference up to five parties (you and four others) in any combina-
tion of outside lines and internal stations in any order.
While engaged in a conversation, press the CONF key and receive con-
ference tone.
Make another call, either intercom or outside, press the CONF key and
receive conference tone.
Make another call or press the CONF key to join all parties.
Repeat the last step until all parties are added.
NOTE: When attempting to add another party to the conference and you are
not able to reach the desired person, hang up. Simply press the CONF key
again to return to your previous conversation.
To drop a party from your conference call:
Press CONF and dial the extension or line number that is to be dropped.
Press CONF again to reestablish the conference.
NOTE: To leave the conference, hang up. Control is passed to the next inter-
nal station. If there are no internal stations and you wish to leave outside
lines connected together in a trunk to trunk conference, press the CONF key
plus the CALL button that the call appears on or follow the instructions to
drop a party and use your extension number. When they hang up, the lines
will release automatically. Press CONF to rejoin a trunk to trunk conference.
CONFERENCE SPLITTING [iDCS 500 L/LE VERSION ONLY]
If you are the controlling party of a conference and your keyset has the Auto
Hold feature turned on (See Customizing Your Keyset) and all of the outside
lines involved in the conference appear as buttons on your keyset, you can
split the conference into separate calls as follows:
Press any one of the outside line buttons. That outside line will remain
steady green to indicate you are still connected to it. All other outside
lines in the conference will be placed on system hold at your keyset. All
intercom callers in the conference will be disconnected. You may now
speak with each caller privately and transfer them as usual or reestab-
lish another conference.
21
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idcs 8dIdcs 64b aomIdcs 14b stripIdcs 18d

Table of Contents