How To Clean Inside Of Printer - Oki C710 Maintenance Manual

Oki Data CONFIDENTIAL

6.4 How to clean inside of printer

Clean inside of the printer.
Toner can adhere to the metal shaft located in between the fuser and the cyan image
drum cartridge depending on the print patter. Perform cleaning of inside of the printer if
toner has adhered to the metal shaft.
(1) Turn off the power of the printer.
(2) Press down the OPEN to open the top cover.
Personal injuries may occur.
The fuser unit gets very hot. Do not touch the fuser unit.
43856301TH Rev.3
O I
OPEN button
(3) Remove the image drum cartridge.
1. Remove the four image drum cartridges and place them on a flat workbench.
2. Cover the removed image drum cartridge with a black paper.
Note! • The image drum (green tubular portion) is highly inherently-brittle. Be
very careful when handling it.
• Be very careful not to expose the image drum to direct sun light or
intense light (light of approx. 1500 lux or more). Do not leave it under the
normal illumination even indoor for 5 minutes or longer.)
6. Periodic Maintenance
123 /