Connecting Usb Cable - Kyocera TASKalfa 3050ci Operation Manual

Connecting USB Cable

Follow the steps below to connect a USB cable to the machine.
Connecting the Power Cable
Connect one end of the supplied power cable to the machine and the other end to a power outlet.
IMPORTANT: Only use the power cable that comes with the machine.
1
Make sure that lamps
other than this lamp
are off.
2
3
2-6
When the machine is powered up, first press the
Power key on the operation panel. Check that the
Power indicator, the processing indicator and the
memory indicator are off. After this, turn off the
main power switch.
Connect the USB cable to the USB interface
connector (B1) located on the left side of the body.
Connect the other end of the cable to the PC.
Preparation before Use