Using Weekly Timer - Kyocera TASKalfa 3050ci Operation Manual

Using Weekly Timer

"Weekly Timer" is installed on the machine as a standard application. Weekly Timer allows you to store machine
on/off times for each day of the week and set the machine to automatically turn on and off at those times.
IMPORTANT: On/off using Weekly Timer puts the machine in the same state (sleep) as when the power key is
pressed on the operation panel. When using Weekly Timer, do not turn off the main power switch.
NOTE:
When user management is enabled, you must log in with administrator authority to use this feature.
Be sure to set the time before using Weekly Timer. For details, see Setting Date and Time on page 2-12
Setting Weekly Timer
1
Press the Application key.
The application list screen appears.
2
Press [Weekly Timer].
Weekly Timer starts up.
3
Press the [Enable the Application] checkbox so that
a checkmark appears.
4
Select the day you want to set and press [Edit].
5
Press the [Enable] checkboxes for power ON/OFF
so that checkmarks appear, press [+] or [-] to enter
the times, and press [OK].
[# Keys] can be pressed to enter the time with the
numeric keys on the operation panel.
6
If you need to change the number of retries made
when the power is not successfully turned off,
press [Retry Times].
7
Set the Retry Times and the Retry Interval, and
press [OK].
To have retries made continuously until the
machine power turns off, press the [Continue to
Retry] checkbox so that a checkmark appears.
8
To close, press [End].
You will return to the application list screen.
3-61
Basic Operation
3