Punch Waste Full Error
Select what to do when the punch waste box becomes full during printing.
Item
Ignore
Display Error
NOTE:
This setting is displayed when an optional 4,000-sheet finisher and a hole punch unit are installed.
Paper Mismatch Error
Select what to do when the selected paper size or type does not match paper size or type loaded in the specified
paper source while printing from the computer by specifying the cassette or multi-purpose tray.
Item
Ignore
Display Error
Inserted Paper Mismatch
Select what to do when it is detected that the cassette paper size setting does not match the actual paper size
that is fed.
Item
Ignore
Display Error
Paper Jam before Staple
The page from which printing is resumed when a paper jam occurs during a job with stapling can be selected.
Item
Resume at Top of
Page
Resume at Jammed
Page
NOTE:
This setting is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is installed.
Skewed originals
When skewed originals while scanning, select whether to scan by ignoring the error or display an error.
Item
Ignore
Display Error
NOTE:
This setting is displayed when an optional document processor (dual scan DP) is installed.
Printing continues without punching.
Error message to cancel printing is displayed.
The setting is ignored and the job is printed.
Error message to cancel printing is displayed.
Detection does not take place and the job is printed.
Error message to cancel printing is displayed.
Resume printing from the first page of the document.
Resume printing from the page where the jam occurred.
Detection does not take place and the job is scanned.
Error message to cancel scanning is displayed.
9-14
Default Setting (System Menu)
Description
Description
Description
Description
Description