FUTABA 9Z WC2 Getting To Know Manual page 2

This booklet is intended to be a user's guide to help you get to know some of the many powerful
features of the 9Z. It is a supplement to the very detailed instruction manual, and is not meant to
replace it in any manner. Rather it is intended to provide some in-depth explanations and detailed
examples to answer questions you may have about using your new radio.
Note that each example and glossary item includes keystroke-by-keystroke instructions of how to
set up each feature. Every example assumes you have started from a totally blank model memory, and
every command group includes closing the feature back to the home menu and starting from the home
menu to start the next feature. This is done so that you can quickly and easily access one feature
discussed in an example without using all features discussed in that example. You do not need to
close and reopen every menu every time you use a feature. This is simply done for consistency. Every
step assumes you are starting from the home menu unless it is a continuation of programming a
feature from the step before it.
Similarly, each example will have 3 columns: the first explains what the programming is going to
do; the second explains the process, and the third is the actual keystrokes of how. By reading through
all 3 columns with each example you will become more familiar with the radio's layout and
programming. It may take some time, so be patient, but the end result is well worth it!
Updates and Additions? Please visit www.futaba-rc.com. As corrections and additions are made,
new pages will be available here.
Additional questions? We hope you find this guide helpful in getting to know your 9Z. Have
suggestions for future additions, or other questions? Please visit our Frequently Asked Questions area
at www.futaba-rc.com/faq to see if your question may have already been answered. If not, then
follow the "contact us" information area to contact our support team directly as listed below.
Need to send your 9Z for service? Please ship your radio (including the module, receiver, servos,
battery, switches, and any other installed electronic equipment, especially following a crash or if asking
us to diagnose an unknown problem) to:
ADDRESS:
Futaba Service Center
1610 Interstate Drive
Champaign, IL 61822
Please be sure to provide us a detailed explanation of your concerns and service required, as
well as at least 2 means of daytime contact: phone, fax, or email are great, as well as your return
mailing address. If this is non-warranty service, please also provide a means of payment (Visa,
Mastercard). Please note that upon request we will contact you with an estimate prior to performing
ANY repairs to a non-warranty item, so be sure to provide an easy way to reach you to avoid delays.
Questions for Service?
phone: 217-398-0007
fax 217-398-7721
email: service@futaba-rc.com
Questions for Support?
217-398-3630 x4
217-398-7721
email: support@futaba-rc.com