Rinnai Prestige Operation & Installation Manual page 27

Fastening Cylinder to Roof
Lift the storage cylinder onto the roof and
locate it above the collector bank� The
cylinder's position should be as central as
possible to the collector bank� The lower rail
must be on a load bearing surface�
Slide the cylinder support strap into the slots
located in the uppermost cylinder support
bracket so that the strap is in line with a
suitable fastening position
Tiled Roof
Remove tiles one row up from the storage
cylinder� Apply tension to the straps and attach
them to the rafters using a suitable fastener�
Replace the tiles
Metal Roof
Bolt the lower support rail to the roof using a
suitable fastener�
Apply tension to the cylinder support straps
and attach them to the rafters using a suitable
fastener�
Seal any holes in roof using a suitable sealant
to ensure roof is water tight�
Rinnai
InsTallaTIon - all sysTeMs
TILE
REMOVED
FASTEN STRAP
TO RAFTER
BOLT STRAP TO ROOF USING
A SUITABLE FASTENER
LOWER CYLINDER RAIL MUST BE LOWER CYLINDER RAIL MUST BE
ON A LOAD BEARING SURFACE ON A LOAD BEARING SURFACE
27
LOWER CYLINDER RAIL
MUST BE ON A LOAD
BEARING SURFACE
BOLT RAIL TO ROOF USING
A SUITABLE FASTENER
CC OIM Issue 9