Rinnai Prestige Operation & Installation Manual page 24

InsTallaTIon - all sysTeMs
Fastening Collectors to a Tiled Roof
This type of installation is not suitable for use on roofs over 10 m high�
This type of installation is not suitable for use in cyclonic areas�
WARNING
Attach the collector mounting straps to the rafter or
truss under the tiles�
Place the collector(s) onto the roof above the lower
rail� If more than one collector is being installed then
join them together using the compression fittings
supplied�
Push down on the collector retainers to clamp the
collector and tighten the nuts�
Position the upper collector rail above the collectors�
Push down on the retainers to clamp the collector and
tighten the nuts�
Attach the collector mounting straps to the rafter or
truss under the tiles�
Replace the tiles and ensure the collector is secure�
Rinnai
Tiles removed
Nail strap to rafter
Tiles removed
Nail strap
to rafter
24 CC OIM Issue 9