InsTallaTIon - all sysTeMs
Attaching mounting rail to cylinder on stainless steel cylinders
Depending on the packaging, either one or two rails are attached to the cylinder�
Rail
Washer
Bolt
Spring
Washer
Rinnai
The extra rail and fastenings are packed with the cylinder�
They are screwed into the rail mounting holes in the
cylinder�
Attach the rail using the bolts, washers and spring washers
in the order shown�
Ensure the feet on the rails face outwards
Ensure that the bolt is tightened sufficiently to flatten the
spring washer� This ensures that the bolt is adequately
tightened�
Once the rail is attached and suitably tightened, continue
the cylinder installation as shown on the next page�
26
CC OIM Issue 9