Intermec EasyCoder PF2i Service Manual page 254

Appendix A—Program Overviews
Setup Mode Overview (FP v8.10)
SETUP: These menus will only be displayed when an optional Double Serial interface board is installed,
SER-COM, UART3 also see the overview for Serial Communication, uart2.
SER-COM, UART3: SER-COM, UART3:
BAUDRATE CHAR LENGTH
BAUDRATE; CHAR LENGTH
9600 8
BAUDRATE; CHAR LENGTH
19200 BAUDRATE;
7
38400 BAUDRATE;
57500 BAUDRATE;
115200 BAUDRATE;
300
BAUDRATE;
600 BAUDRATE;
1200 BAUDRATE;
2400 BAUDRATE;
4800
FLOW CONTROL:
XON/XOFF
XON/XOFF:
DATA TO HOST
DATA TO HOST:
DISABLE
DATA TO HOST:
ENABLE
SER-COM, UART3:
CONNECTED HW
CONNECTED HW:
RS232
Read-only
246
SER-COM, UART3: SER-COM, UART3:
PARITY STOP BITS
PARITY: STOP BITS:
NONE 1
PARITY: STOP BITS:
2
EVEN
PARITY:
ODD
PARITY:
MARK
PARITY:
SPACE
SER-COM, UART3:
NEW LINE
NEW LINE:
CR/LF
NEW LINE:
LF
XON/XOFF:
DATA FROM HOST
DATA FROM HOST:
DISABLE
DATA FROM HOST:
ENABLE
Intermec EasyCoder PF2i, PF4i, and PF4i Compact Industrial—Service Manual
SER-COM, UART3:
FLOWCONTROL
FLOW CONTROL:
RTS/CTS
RTS/CTS:
DISABLE ENQ/ACK:
ENABLE
SER-COM, UART3:
REC BUF
REC BUF:
[1024]:
NEW LINE:
CR
Ser-Com, uart3
FLOW CONTROL:
ENQ/ACK
ENQ-ACK:
DISABLE ENQ/ACK:
ENABLE
SER-COM, UART3:
TRANS BUF
TRANS BUF:
[1024]: