Epson EMP-7850 User Manual page 118

Problem Solving Problem Solving
Error messages from EMP Monitor
Check
The password is incorrect.
Cannot connect to the projector of the IP
address entered.
An incorrect password was entered. Enter the correct password. If you have forgotten the password,
check the "Password for WEB control" in the Network Screen Network advanced settings on the
projector.
Ensure that the "Access point mode" or "Wired LAN connection mode" setting is being used in the
Network Screen Network advanced settings of the projector. Change to Access point mode or Wired
LAN connection mode, if set to Easy connect mode.
Next, check the "IP address" in the Access point mode advanced settings screen, or Wired LAN
connection mode advanced settings screen and specify this "IP address" when connecting in IP
connect mode. "What if the projector you want does not appear" in the EasyMP Setup Guide
If connection is still not possible, check the LAN on the computer and the Network Screen Network
advanced settings on the projector.
For details concerning the Network advanced settings
Wired LAN Connection Mode" in the EasyMP Setup Guide
EMP-7850 User's Guide
Remedy
"Connecting in Access Point Mode or
117