Turning The Projector On; Connecting The Power Cable - Epson EMP-7850 User Manual

Turning the Projector On

Turn the power on to start projecting images.
CAUTION
Be sure to read the Safety Instructions/World-Wide Warranty Terms
before projecting images.

Connecting the Power Cable

PROCEDURE
Check that the power is turned off for the projector
1
and, if necessary, that all components are connected
to the projector.
Connect the computer or other video source to the
2
projector. p.18,
When making a wireless LAN connection, set the
included wireless LAN card into the card slot of the
projector. p.16
Remove the lens cover.
3
p.27
Connect the accessory power cable to the projector.
4
Check that the power connector is facing the same way as the
power inlet on the projector, and then insert the power cable
connector securely into the projector.
Connect the other end of the power cable to an
5
earthed electrical outlet.
Wait until the indicator lights orange.
Lit orange
TIP
The remote control and the projector's control panel buttons will not
function while the indicator is flashing orange.
EMP-7850 User's Guide
35