Epson EMP-7850 User Manual page 85

Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
No-Signal Sets the message status and background colour at times
Msg. such as when no video signal is being input.
When set to "OFF", the background colour becomes black
and no message is displayed.
•To change the user's logo, you need to record your own
logo. p.126
Message Selects whether the image signal name or colour mode
name is displayed on the screen (ON) or not displayed
(OFF) when switching the video signal or colour mode.
A/V Mute Sets the screen status when the [A/V Mute] button is
pressed. p.62
•To change the user's logo, you need to record your own
logo. p.126
Computer Selects the input signal for the source that is connected to
Input the [Computer] port.
BNC Input Selects the video signal to match the device that is
connected to the [BNC] port.
Sleep Sets the energy saving operation when no video signal is
Mode being input.
•When set to "ON", projection stops automatically and after
the cool-down period is finished, the projector changes
to sleep mode (standby mode) if no operations are carried
out for approximately 30 minutes while the "No-Signal."
message is being displayed. (The
orange.)
•Projection starts again when the [Power] button on either
the remote control or the projector's control panel is
pressed.
Reset Resets all adjustments values for the "Setting" menu
functions except for the "Computer Input" and "BNC Input"
settings to their default settings.
•Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel to
reset.
•Select "Reset All" to reset all menu settings – including
settings for the "Video" and "Audio" menus – to their
default settings.
Function
indicator lights
p.91
EMP-7850 User's Guide
84
Default
Blue
ON
Black
Analog-RGB
Analog-RGB
OFF
-