Yamaha Digital Sound Projector YSP-4300 Owner's Manual page 67

Advanced setup
!!!!!l!li!!ii! !!! !i i !iii @ liii,!, !
TURN ON VOLUME Sets the vohnne level at pnwer-nn. OFF" (Not set), 1 to 70
MAX VOLUME Sets the maximum vnhnne level. 1 to 99, MAX' (Maximum)
1NPUT LOCK EnablesMisables the 1NPUT key nn the front panel. ON (Disabled), OFF" (Enabled)
PANEL LOCK EnablesMisables the keys on the flout panel. ON (Disabled), OFF" (Enabled)
R.1NPUT POWER Enables/disables power-on by remote control input ON (Enables power-on), OFF"' (Disables power-nu)
selector keys when the unit is in the standby mode.
AC ON STANDBY Sets whether or not this unit returns to its previous ON" (Enters standby mode),
state when AC power is restored after a temporary OFF (Restores the state before power was lost)
povv'er lnss.
MEMORY PROTECT Protect system memnry 11213 6_p. 28). ON (Protect is performed),
OFF"' (Protect is not perlormed)
YRB FL 4} Use the YRB-100 reflection board lot the fl'nnt lel: YES (The reflection board is used),
chanuel. NO:" (The reflection board is not used)
YRB FR a? Use the YRB-100 reflection board lot the fl'ont right YES (The reflection board is used),
chanuel. NO:" (The reflection board is not used)
YRB SL 4} Use the YRB-100 reflection board for the surround YES (The reflection board is used),
left channel. NO:" (The reflection board is not used)
YRB SR a? Use the YRB-I O0 reflection board for the surround YES (The reflection board is used),
right channel. NO:" (The reflection board is not used)
FW UPDATE Confirm firmware versiou/update firmware. 02.00.04* (The firmware version is displayed) _?,
START OK'? (Firmware is updated)
INITIALIZE G} Resets all settings to their default values. OK (All settings are restored to their delanlt values),
CANCEL:' (Settings are not restored to their default
values)
il;i;iiiii_;il
(3
;711
_ :7
4) ='4<
When a menu lor Ihe YRB settings is selecled, nu-screeu inslruclions for
installing the reflection board is displayed. See documentation provided
with the YRB-100 for inslruclions on installing the YRB-100.
"02.00.04" is an example of firmware version display in the advanced
setup nleuu.
6>='4£
When the unit ffeezed, the problem may solve by restoring to their
default values.
67 En