Image Location; Channel Out - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Setup menu
Example
Front left channel Center channel
With positive focal With negative focal
lengths lengths
+
IMAGE LOCATION
ff sound iYom the left and right channels is unnatural, first adjust
the volume of each channel (_,: p. 33, 62).
If this does not resolve the problem, adjust left- and right-channel
image location.
Use to adjust the direction from which the front left and right
channel sound is heard so that each sound call be heard closer to
the center channel.
Use this feature to redirect audio signals if the sound coming
from the front left and right channels seems unnatural.
You can adjust this parameter only when "5Beam/Plus2",
"5Beam" or "3Beam" is selected in "Changing the audio output
method for surround playback" (_,: p. 36).
Sub menu: ADJUSTMENT
Select "ON" to configure the sound direction.
Seleetable item: OFF*, ON
The higher the percentage, the louder the output from the
center channel.
Control range: 0%* to 95%
Right-channel sound is
unnatural
With the front right
channel adjusted
CHANNEL OUT
Sub menu: 5.1ch, 7.1ch, AUTO*
Specify the sound beam output method (5. lch, 7.1ch, AUTO).
When "AUTO" is selected, sound beams are output from the
appropriate number of channels based on input signal as follows.
- 2- or 5.l-channel input: 5.l-channel output
- 6.1 - or 7.1 -channel input: 7. l-channel output
The available sound beam output methods vary depending upon
the current "CHANNEL OUT" setting (_: p. 36).
@
ilii _i_i_ii _
The higher the percentage, the louder the output from the
center channel.
Control range: 0%* to 95%
Left-channel sound is With the front left
unnatural channel adjusted
iiiI _i(ii12
iiil i _i_ii:i_
iiii _,_;iiii)
61 E,