Yamaha Digital Sound Projector YSP-4300 Owner's Manual page 43

Hide thumbs Also See for Digital Sound Projector YSP-4300:
Table of Contents

Advertisement

Playback features
Option
menu
items
Tile following
menu items are provided
for each input.
TREBLE, BASS, VOLUME TRIM, AUDIO
DELAY, AUDIO ASSIGN
HDMI 1 4
TV
OPTICAL
AUX
ANALOG
Y1T
FM
(YSP-4300 only)
USB
(YSP-4300 only)
TREBLE. BASS. VOLUME TRIM, AUDIO
DELAY
TREBLE. BASS. VOLUME TRIM
TREBLE, BASS. VOLUME TRIM, AUTO
PRESET a . CLEAR PRESET _), FM MODE a)
TREBLE. BASS, VOLUME TRIM, REPEAT L0,
SHUFFLE 4
The option
menu items
are listed below'. These
settings
are
applied
to the currently
selected
input source.
The default
settings
are marked
with "*"
Adjusting tones (TREBLE, BASS)
Adjust
tile output
level
of high (treble)
and low' (bass)
tones.
Adjustable
range:
-12 to +12 (default:
0)
Adjusting input level of each jack
(VOLUME TRIM)
Adjust
tile input level
for each jack to compensate
for variations
in volume
between
different
input devices.
Adjustable
range:
-12 to +12 (default:
0)
Audio delay control (AUDIO DELAY)
TV images
sometimes
lag behind
tile sound.
You can use this
function
to delay
the sound
output
to synchronize
it with the
video
image.
Adjustable
range:
HDMI1-
4: AUTO*,
0 ms to 500 ms
TV, OPTICAL,
AUX,
ANALOG:
0 ms* to 500 ms
When
"AUTO"
is selected,
output
timing
is automatically
adjusted.
This
setting
is only available
when
the TV connected
via HDM[
cable
supports
the audio delay
automatic
adjustment
feature.
Assigning HDMI audio to a different input
jack (AUDIO ASSIGN)
When
HDM[I-
4 is tile selected
input source,
sound
can be input
from the OPTICAL
or AUX
(digital
coaxial)jack
rather than the
HDM[ jack.
Selectable
item:
HDMI*,
OPTICAL,
AUX
:_:
Tip
While the AUX INPUT DIGITAL (coaxial)jack
is the default AUX
setting, sound is input as follows depending upon the setting
specified li)r "TV INPUT" 0_p. 63) in the setup metal
"TV INPUT" set to "OPTICAL"
(default)
When "AUX" is selected, sound is input from the AUX INPUT
DIGITAL (coaxial)jack.
"TV INPUT" set to "COAXIAL"
When "AUX" is selected, sound is input from the INPUT DIGITAL
TV (optical) jack.
CII;)
i)
..... { i
_ :;7
See "FM tuning (YSP-431)(t only)" (_p. 44).
4) _(_,':
• See "Connecting
a USB device" (_ p. 54).
• The REPEAT and SHUFFLE ligatures in the option menu can be used
when an iPod is connected to this unit via the USB cable supplied
with theiPod0_
p. 51).
• The REPEAT ligature can be used when a USB device is connected to
this unit(_
p. 57).
)
43
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital sound projector ysp-3300

Table of Contents