Setting The Surrounddecoder - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Playback features
SURROUND
TARGET
STEREO
Setting the surrounddecoder
When this unit plays back 2-channel or 5.1 -channel sources in the
surround mode, surround decoder enables them playback for
7. l-channel. I) You call enjoy a variety of surround sound effects
by switching the decoder. 2}
To enable a surround decoder, press the SURROUND key to
select "DSP Oft"'.
Selec t the desired decoder from the setup
menu --* !,SOUND,! --*,!MATRIX DECODER,'i
See "Setting the setup menu" under "Setup menu" ffX'p. 58) for
instructions oil accessing the setup menu.
Available decoders and recommended sources
2ch -_ 5ch
PLII
(Dolby Pro Logic 11)
Movie
Music
Game
Movies
Music
Games
Nero6 (DTS Neo:6) Cinema Movies
Music Music
2ch -_ 7ch
PLllx
(Dolby Pro Logic llx)
Movie
Music 3)
Game
Movies
Music
Games
Nero6 (DTS Neo:6) Cinema Movies
Music Music
About the surround decoder for playback of 5,1-channel
sources
When "Ch Out" (channel output) is set to "7. l ch', this unit decodes
5.1-channel sources and then playback them in up to 7.1-channel
surround 0_ p. 36). One of the following decoders is automatically
selecled depending on the input signals.
PCM, Dolby Digital, Dolby Digital Surround
EX, Dolby TrueHD, Dolby Digital Plus
Dolby Pro Logic
llx Movie/Music
DTS Digital, DTS-ES matrix, DTS-HD Master DTS-ES matrix
Audio, DTS-HD High Resohltion Audio
DTS-ES discrele DTS-ES discrete
2} :(_
• Available decoders vary depending upon the selected sound beam
chalmel output setting 0_ p. 37).
• Decoders are disabled when stere<) playback mode (_'_p. 33), My
Surround 0_p. 36, 37), or target playback mode 0_p. 39) is enabled.
S} _
Dolby Pro Logic llx Music parameters (Center Width, Panorama, and
Dimension) can be adjusted from the setup menu 0_p. 63).
38
En