Controls And Functions; Centerunit Front Panel(Front, Top) - Yamaha Digital Sound Projector YSP-4300 Owner's Manual

Controlsand functions
Centerunit front panel(front, top)
YSP-CU4300
I iNPUT -- VOLUME +
V
YSP-CU3300
I NPUT - VOLUME +_ 1
V
ilii _i_i_ii _
', ,, i iiiii_'_!_i_i II! . ...........
Remote control sensor
Receives infrared signals from the remote control (_'p. 9).
Remote control sensor of a TV
Receives infrared signals fi'c)m the TV remote control when
the TV Remote Repeater function is enabled (_ p. 12).
O Wireless module
Receives and sends w'ireless signals. Do not place metal
objects in front of the wireless module as they may interfere
with the w'ireless module's ability to receive and send
wireless signals.
Front panel display
Show's information about the operational status of this unit
(_ p. 8).
USB jack (YSP-4300 only)
Enables connection of a USB device (_ p. 48, 54).
SURROUND indicator
Lights up according to the input signal.
Displayed Input signal
color
Blue Following surrotmd audio signal lormats:
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution,
Multi-channel Linear PCM
Orange Surround audio signal other than above
Off Stereo/monam'al audio signal or no signal
@ STATUS indicator
Lights up when the power is turned on, and goes off in the
standby mode.
INPUT key
Selects the playback component (_ p. 32).
VOLUME (+/-) key
Adjusts the volume of the unit (_ p. 32).
@ _ key
Turns on the unit or set it to the standby mode.
n the standby mode, this unit consumes a small amount of
ower in order to search for HDM[ signals or to receive
infi:ared signals fi:om the remote control.
)
SEn