Table of Contents
Advertisement
Loewe bild
User handbook
External devices
Connecting the speaker system (AUDIO OUT)
You can easily connect a speaker system using the AUDIO OUT
interface of your TV set.
Switch off all devices before connecting the speaker system.
The subwoofer is connected to the TV set via the AUDIO OUT
interface.
Connect the analogue audio output AUDIO OUT of the TV set with a
stereo cinch/jack adapter cable to the Line IN audio inputs left/right
of the subwoofer.
Further information on the wiring of the speakers you find in the
instruction manual of the subwoofer or the speakers.
Only turn in the power switch of the subwoofer after having selected
the menu item Speaker system (AUDIO OUT) in the Sound
Component Wizard. Otherwise, the sound system will operate with
maximum volume.
TV set
AUDIO
OUT
Front
Front
left
right
Example of connecting a speaker system to your TV set
Configuration of the speaker system (AUDIO OUT)
When configuring the sound system in the sound components wizard
enter if you want to use e.g. external front speakers or how the TV
speaker is used (see chapter System settings, section Connections
– Sound components).
Only turn in the power switch of the subwoofer after having selected
the menu item Speaker system (AUDIO OUT) in the Sound
Component Wizard. Otherwise, the sound system will operate with
maximum volume.
(1
Only for set types with built-in DAL connection (see chapter Technical data - equipment features for your TV set).
Line IN
Line IN
left
right
Subwoofer
Connecting the speaker system (DAL)
You can easily connect a Loewe speaker system using the DIGITAL
AUDIO LINK interface (DAL) of your TV set.
Switch off all devices before connecting the speaker system.
The subwoofer is connected to the TV set via the DIGITAL AUDIO
LINK interface. Plug a network cable (Category 5e or higher) to the
DIGITAL AUDIO LINK port of the TV set.
If you are using a subwoofer with DIGITAL AUDIO LINK interface
(for example klang 1 subwoofer or klang 5 subwoofer), connect the
network cable directly to the subwoofer.
For subwoofers with AUDIO LINK interface (see picture below),
connect the Ethernet cable to the RJ45 jack of the optionally available
Digital Audiolink / Audiolink converter.
Connect the converter to the AUDIO LINK socket of the Subwoofer.
Further information on the wiring of the speakers you find in the
instruction manual of the subwoofer or the speakers.
TV set
DIGITAL
AUDIO
LINK
Converter
Digital Audiolink / Audiolink
Front
Front
right
left
Center
Surround
Surround
left
right
(Subwoofer with AUDIO LINK) to your TV set
Configuration of the speaker system (DAL)
When configuring the sound system in the Sound Component Wizard,
you can eg enter the distances of each speaker corresponding to your
listening position or adjust the level of each speaker individually.
This guarantees a natural spatial image of the sound (see chapter
System settings, section Connections – Sound components).
Connecting the speaker system (DAL)
(1
Ethernet cable
(Cat. 5e or higher)
Subwoofer
Example of connecting a speaker system
145
Advertisement
Table of Contents
