Panasonic BB-HCM311A Operating Instructions Manual page 131

Automatic Setup (Local or Internet Access) or Manual Setup
1.
Click [Execute] on the Camera List window shown on page 130.
2.
Click each button to execute the program.
Notes
• For the first time installation or after pressing the FACTORY DEFAULT
RESET button, you must select [Automatic Setup (Local Access Only)]. To
start the Manual Setup, execute Automatic Setup (Local Access Only)
first, and then start the Setup Program to execute the Manual Setup.
• See the Getting Started for the local and Internet access setup.
Manual Setup window
Set up each parameter seeing page 40—page 41.
• If "Camera setup completed" is displayed, click [Close] to finish the
Manual Setup.
3.
Close all Setup windows.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
Sets up the camera to view on
the LAN.
Sets up the Internet access to
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the
button is displayed gray.
Displays the Setup page (see
page 35).
131