Tenda AC1200 User Manual page 96

High Power Wireless AC1200 Dual Band Router
is recommended, because this feature allows the router to detect the physical
changes of the network layout automatically. If you want to use static routing,
make sure the router 's DHCP function is disable d.
Click Advanced -> Static
Routing to enter the configuration scre en.
----------------------------------------------------------------------------------------
Tip
1. Gateway must be on the same IP segment as WAN or LAN segment as the router.
2. Subnet Mask must be entered 255.255.255.255 if destination IP address is a
single host.
------------------------------------------------------------------------------------------------
Static Route Application Example - Gateway IP address on the same IP segment
as WAN IP:
For example, your company internal network and Internet are on different IP net
segment and you want PCs on your LAN to access Internet and your company
internal network via the Tenda Router. You can simply configuring static routes on
the Tenda Router. The figure above depicts this application scenario.
Configuration Procedures:
91