①
Mode: Select WDS Mode.
②
WDS Mode: Select Wireless AP.
③
SSID: Customize a SSID, for example, Tenda_home.
④
Channel: Specify a channel for the base station AP to operate on, for
example, 2437MHz (Channel 6).
⑤
Remote MAC Address: Manually enter the MAC addresses of the two
remote repeater APs (You can click Open Scan to view the MAC addresses).
⑥
Security Mode: Specify security mode/authentication type, cipher type
and security key for th e base station AP.
⑦
Click Save to save your settings.
⑧
Click Network -> DHCP Server on the base AP's configuration interface
to enable the DHCP server.
High Power Wireless AC1200 Dual Band Router
62