Tenda AC1200 User Manual page 82

You can use the following 4 methods to establish a WPS connection:
Method 1: Establish a WPS connection using PBC on the Web Manager:
①
Select a band, for example, 2.4GHz.
②
Click Enable.
③
Click Save to save your settings.
④
Click Start PBC.
⑤
The WPS LED on this router will keep blinking for 2 seconds. Within these 2
minutes, enable WPS/PBC on the wireless client to join your wireless network.
Method 2: Establish a WPS connection using the hardware WPS button on the
device:
①
Select a band, for example, 2.4GHz.
②
Click Enable.
③
Click Save to save your settings.
④
Press and hold the WPS button on the back panel of this router for about
1-3 seconds and then release it.
⑤
The WPS LED on this router will keep blinking for 2 seconds. Within these
2 minutes, enable WPS/PBC on the wireless client to join your wireless network.
High Power Wireless AC1200 Dual Band Router
77