Tenda AC1200 User Manual page 78

A. If you want to allow all wireless clients to join your wireless network, select
Disable.
B. If you want to allow ONLY the specified wireless clients to join your wireless
network, select Allow Access to Wireless Network.
C. If you want to disallow ONLY the specified wireless clients to join your
wireless network, select D eny Access to Wireless Network .
Wireless Access Control Application Example:
To only allow your own notebook at the MAC address of C8: 3A:35:C2:CA:E7 to
join your wireless network (SSID ： Tenda_home)
Configuration Procedures:
①
Select the wireless band you wish to use, for example 2.4Ghz.
②
Click Enable.
③
Select Allow Access to Wireless Network.
④
Click Add.
High Power Wireless AC1200 Dual Band Router
73