Lorex LW2960 Series User Manual page 21

8 Using the System
1. Signal indicator: The signal indicator shows the strength of the signal being received
from the camera. The number of bars in the Signal Indicator shows the strength of the
signal. One, or no bars indicates the signal is poor, and 4 bars indicate a very strong
signal.
NOTE
• If the signal is low (e.g.,1 or 2 bars) adjust the antennas, or reposition the cameras or receiver for
best performance.
• The signal indicator is not shown during Quad mode.
2. Camera indicator: Displays the camera you are presently viewing. If viewing multiple
cameras at once, the camera indicator will appear above each video display.
3. Memory card icon: A white icon shows that a microSD card with available recording
space is inserted in the receiver. A red icon indicates the microSD card is full.
4. Network status icon:
• — The receiver is connected to the Internet.
• — The receiver is connected to the router, but is not connected to the Internet.
Turn the receiver on and off again if you see a yellow icon.
• — The receiver is not connected to your router.
• — A smartphone / tablet is accessing the system remotely.
5. Talk icon: Indicates that the talk function has been enabled on the receiver.
6. Recording indicator: "REC" appears when recording is in progress. If viewing and re-
cording video from multiple cameras at once, the recording indicator will appear above
each video display where recording is enabled.
7. Zoom indicator: Indicates that the current live view is zoomed in to twice the original
size.
#LX400011; r. 2.0/24200/24203; en-US
15