Wireless Remote Control And Its Functions; Timer Button - Toshiba RAV-SM561KRT-E Owner's Manual

WIRELESS REMOTE CONTROL AND ITS FUNCTIONS

1 Infrared signal emitter 1 1 1 1
Transmits a signal to the indoor unit.
2 2 2 2 START/STOP button 2
Press the button to start operation.
(A receiving beep is heard.)
Press the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
press the button twice.
3 3 3 3 3 Mode select button (MODE)
Press this button to select a mode.
Each time you press the button, a mode is selected
in a sequence that goes from A : Auto changeover
control, : Cool,
and back to A. (A receiving beep is heard.)
4 4
4 4 Temperature button ( 4
, ....... The set temperature is increased up to 30°C.
9 ....... The set temperature is dropped down to 17°C.
(A receiving beep is heard.)
5 5 Fan speed button (FAN) 5
5 5
Press this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed from among five settings.
+
(LOW , LOW
+
MED
(A receiving beep is heard.)
6 6 6 6 6 Auto flap button (SWING)
Press this button to swing the flap.
(A receiving beep is heard.)
Press the SWING button to stop the flap swinging.
(A receiving beep is heard.)
( see page 14.)
7 Set flap button (FIX) 7 7
7 7
Press this button to adjust the air flow direction.
(A receiving beep is heard.) While this button is kept
depressed, the receiving tone continuously sounds.
( see page 14.)
8 8
8 8 8 Off timer button (OFF)
Press this button to set the OFF timer.
9 9
9 9 9 On timer button (ON)
Press this button to set the ON timer.
! ! ! ! Reserve button (SET) !
Press this button to reserve time settings.
(A receiving beep is heard.)
" "
" " Cancel button (CLR) "
Press this button to cancel ON timer and
OFF timer. (A receiving beep is heard.)
# # # High power button (Hi POWER)
# #
This function is not operated twin and group
combination. (
Press this button to start the high power operation.
( see page 22.)
EN
: Dry, : Heat, : Fan only,
)
, MED ,
, HIGH )
see page 7.)
$ Memory button (MEMO) $ $ $ $
Press this button to stand by memorizing the settings.
Press the button again for more than 3 seconds to
memorize the setting indicated on the remote control
and mark is indicated. (
% % % Automatic operation button (AUTO) % %
Press this button to operate the air conditioner
automatically. (A receiving beep is heard.)
& &
& & ECO timer button (ECO) &
This function is not operated twin and group
combination. ( see page 7.)
Press this button to start the ECO timer (OFF timer)
operation.
You can select the OFF timer time from among four
settings (1, 3, 5 or 9 hours). (
( FILTER button ( (
( (
This function is not used this unit.
) )
) ) PRESET button )
Press this button to operate the air conditioner
according to settings memorized by the MEMO button.
( see page 13.)
~ ~
~

~ TIMER button

~
Use this button to change the clock, ON timer, and
OFF timer times.
To forward the time, press the "TIMER
To set back the time, press the "TIMER
4
2
5
6
SWING
7
9
ON
8
(
3
4
see page 13.)
see page 22.)
" button.
" button.
1
AUTOA
A
B
PRESET
START/STOP
AUTO
FAN MODE
ECO Hi-POWER
TIMER
FIX MEMO
OFF SET CLR
FILTER
RESET CLOCK CHECK
)
3
%
&
#
$
"
!
~