Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM Owner's Booklet page 64

Step 2: Clean Test Strip Holder
Wash the Test Strip Holder with
soap and water.
Clean the underside of the Test Strip
Holder and check the small hole for
any dirt, blood, or lint. Rinse well.
Dry completely with a soft cloth or
tissue.
Step 3: Clean Test Area
CAUTION: DO NOT GET
WATER INSIDE THE METER.
The following cleaning agents will
damage the Meter.
DO NOT USE:
Alcohol
Cleansers with ammonia or phenol
Windex or other glass cleaners
®
Abrasive cleansers
57