Lifescan ONE TOUCH BASIC BLOOD GLUCOSE MONITORING SYSTEM Owner's Booklet page 41

Step 3: Accurate results in
45 seconds
The Meter then counts down from
45 to 0 seconds, followed by a series
of beeps when your result is displayed.
mm 6 . 0
IMPORTANT:
Always check that "MM" and a
decimal point are displayed with
your blood glucose result. If not, you
may have accidentally changed the
display language and unit of mea-
surement to "P 1" English (mg/dL)
or an electronic malfunction may
have occurred. See Setting the
Meter, page 7, to reset the language
and unit of measurement to "P 3"
English (mmol/L).
(example)
mm 6. 0
automatically turns off. The Meter
displays results which are between
0 and 33.3 mmol/L. Results above
33.3 mmol/L are displayed as
Press the On/Off Button to turn the
Meter off.
34
Be sure to wait for
the beeps before
you note your
result. Your result
will continue to
display until you
turn the meter off
or for 2 minutes,
when the meter
high