Repeat Playback Of A Specific Section (A-B Repeat) - Zoom R24 Operation Manual

Playback

Repeat playback of a specific section (A-B repeat)

You can set a beginning point (A) and an ending point (B) in a project and repeat playback
between them.
Setting A-B points
1
2
Press
Appears on
display
3
Locate the end point.
4
Press
Appears on
display
A-B repeat: playback repeatedly
5
Press to start playback.
6
Press to stop playback.
Cancel repeat and clear points
7
Press to cancel repeat
playback and clear the
A-B points.
The repeat icons
disappear from the
display.
Locate the
beginning
point.
HINT
• When playback reaches point B, it automatically
goes back to point A and continues playback.
• While the A-B icon appears, playback repeats
continuously.
• These settings can be made both during play-
back and when stopped.
• If you set point B at a time before point A, repeat
playback will occur from point B to point A
instead.
• To make new settings, press the A-B REPEAT key
to cancel it once and then follow the procedures
to make new ones.
A-B repeat section
Repeat playback
32