SECTION 9—TILLER ADJUSTMENT
SECTION 9—TILLER ADJUSTMENT
Adjusting the Tiller Angle
Before performing any maintenance, adjustment or service, turn power Off and remove key
from ignition.
DO NOT hang items off of the tiller adjustment lever.
Ensure that tiller is properly adjusted before driving the scooter.
After making any tiller angle adjustments and before use, the tiller MUST be securely locked into
position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage to
the scooter. Gently, push/pull against tiller to ensure that the tiller is securely engaged.
NOTE: For this procedure, refer to FIGURE 9.1.
NOTE: The powered scooters feature an adjustable tiller. The tiller can also be folded down for transportation and storage.
1.
Pull and hold the tiller adjustment lever.
2.
Move the tiller to the desired position.
3.
Release the tiller adjustment lever to lock the tiller into the desired position.
4.
Gently push/pull against tiller to ensure that the tiller is securely locked.
Leo Scooter
WARNING
Tiller Assembly
Tiller Adjustment
FIGURE 9.1 Adjusting the Tiller Angle
28
Lever
Part No. 1163141