Installing the Seat Positioning Strap
NOTE: For this procedure, refer to FIGURE 8.8 on page 27.
1.
Locate the mounting bracket (Detail "A") under the rear of the seat.
2.
Secure one side of the seat positioning strap to the mounting bracket using the bolt and nut (Detail "B").
NOTE: The nut should go towards the center of the scooter.
3.
Repeat STEPS 1‐2 on the opposite side of the seat with the remaining side of the seat positioning strap.
Seat
DETAIL "B" - HARDWARE
Part No. 1163141
Nut
Bracket
Seat Positioning
Strap
FIGURE 8.8 Installing the Seat Positioning Strap
Bracket
DETAIL "C" - SEAT POSITIONING
STRAP INSTALLED
Bolt
27
SECTION 8—SEAT AND ARMS
DETAIL "A" -
BRACKET
Seat Positioning Strap
Leo Scooter