Tiller Adjustment; Adjusting The Tiller Angle - Invacare Lynx L-3X User Manual

8 Tiller Adjustment

8.1

Adjusting the Tiller Angle

WARNING
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition.
Ensure that tiller is properly adjusted before driving the scooter.
After making any tiller angle adjustments and before use, the tiller MUST be securely locked into position. Otherwise, a fall
from the scooter could occur causing bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure
that the tiller is securely engaged into the adjustment plate.
 For this procedure, refer to FIGURE 8.1.
The powered scooters feature an adjustable tiller.
The tiller locks into one of three positions. The
tiller can also be folded down for transportation
and storage.
1. Rotate or pull out the tiller adjustment lever until the pin disengages
from the mounting hole.
2. Move the tiller to the desired position.
3. Release or rotate the tiller adjustment lever to lock the pin into the
desired mounting hole.
4. Gently push/pull against tiller to ensure that the tiller is securely
locked.
Part No. 1145807
Tiller Assembly
FIGURE 8.1 Adjusting the Tiller Angle
35
8 TILLER ADJUSTMENT
Tiller
Pin
Adjustment
Lever
Lynx™L-3X Scooter
Mounting
Hole